China Rxf Series Single-Stage Helical Gearbox with Flange with Good quality

Solution Description

Helical Gear Motor (R Variety) 

Input Configurations

Motor mounted
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Enter (Advert connection)

Output Configurations

Sound output shaft

Solid output shaft with flange

Variants of Helical Equipment Device Series RX / R / RF

Solitary Phase or 2/3 Phase

Foot- or flange-mounted

Foot- and flange-mounted

Flange-mounted with extended bearing housing

Primary Attribute
R sort equipment reducer is an best option for high output speeds or low fat. Usually with a higher level of effectiveness, our helical gear models offer you an optimum ratio in between output torque and installation area. This signifies: a helical gear unit virtually always suits your software.

Technical Information:

Housing substance Cast iron/Ductile iron
Housing hardness HBS190-240
Equipment material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~sixty two °
Gear main hardness HRC33~forty
Input / Output shaft materials 42CrMo alloy steel
Enter / Output shaft hardness HRC25~thirty
Machining precision of gears exact grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Warmth treatment method tempering, cementiting, quenching, etc.
Performance ninety four%~ninety six% (relies upon on the transmission stage)
Sounds (MAX) sixty~68dB
Temp. increase (MAX) 40°C
Temp. increase (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand name of bearings China leading manufacturer bearing, HRB/LYC/ZWZ/C&U. Or other manufacturers asked for, NSK.
Model of oil seal NAK — ZheJiang or other brand names requested

Specification

Design

Strong Output Shaft Dia./Size

mm

Horizontal Centre Height mm

External Flange Dia.

 mm

Electrical power

(kw)

Ratio

(i)

Nominal Torque

(Nm)

 

R/RF37

ф25/50

90

120

.12-.seventy five

five-136

150

R/RF47

ф30/sixty

115

160

.twenty five-2.2

5-173

300

 

R/RF57

ф35/70

one hundred fifteen

200

one.eighteen-5.5

five-173

four hundred

 

R/RF67

ф35/70

130

200

.37-7.5

5-170

500

 

R/RF77

ф40/80

a hundred and forty

250

.55-11.

five-192

750

 

R/RF87

ф50/a hundred

one hundred eighty

three hundred

.seventy five-eighteen.5

5-192

1250

 

R/RF97

ф60/a hundred and twenty

225

350

1.50-thirty.

five-197

2400

 

R/RF107

ф70/one hundred forty

250

350

2.20-forty five.

5-197

3600

 

R/RF137

ф90/a hundred and seventy

315

450

four.00-forty five.00

five-197

6600

 

R/RF147

ф110/210

355

450

7.fifty-ninety.00

5-195

10700

 

R/RF167

ф120/210

425

550

eleven.00-132.00

five-186

14800

 

Company Profile
Packing
Scenarioes

FAQ
Q1: I want to get your products, how can I pay?
A: You can pay by way of T/T(thirty%+70%), L/C ,D/P etc. 

Q2: How can you assure the high quality?
A: A single year’s guarantee towards B/L day. If you satisfy with top quality difficulty, make sure you deliver us pictures or movie to check out, we assure to ship spare elements or new goods to exchange. Our promise not consist of inappropriate operation or wrong specification variety. 

Q3: How we decide on versions and requirements?
A: You can electronic mail us the collection code (for instance: RC sequence helical gearbox) as well as need particulars, this sort of as motor electrical power,output pace or ratio, services aspect or your software…as a lot data as achievable. If you can source some images or drawings,it is nice. 

Q4: If we will not discover what we want on your site, what must we do?
A: We supply 3 alternatives:
one, You can e-mail us the pictures, drawings or descriptions information. We will attempt to layout your items on the basis of our
common types.
two, Our R&D division is skilled for OEM/ODM items by drawing/samples, you can send out us samples, we do custom-made style for your bulk acquiring.
three, We can produce new products if they have great market. We have already developed a lot of products for particular employing profitable, such as special gearbox for agitator, cement conveyor, sneakers machines and so on. 

Q5: Can we get 1 laptop of each merchandise for high quality screening?
A: Sure, we are glad to accept trial purchase for good quality tests.

Q6: How about your product delivery time?
A: Generally for 20’container, it normally takes 25-thirty workdays for RV series worm gearbox, 35-40 workdays for helical gearmotors.


/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Foot/Flange Mounted
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:
Available

|


###

Input Configurations
Motor mounted
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Input (AD connection)
Output Configurations
Solid output shaft
Solid output shaft with flange
Variants of Helical Gear Unit Series RX / R / RF
Single Stage or 2/3 Stage
Foot- or flange-mounted
Foot- and flange-mounted
Flange-mounted with extended bearing housing

###

Housing material Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft material 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK.
Brand of oil seal NAK — Taiwan or other brands requested

###

Model
Solid Output Shaft Dia./Length
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
 
R/RF37
ф25/50
90
120
0.12-0.75
5-136
150
R/RF47
ф30/60
115
160
0.25-2.2
5-173
300
 
R/RF57
ф35/70
115
200
1.18-5.5
5-173
400
 
R/RF67
ф35/70
130
200
0.37-7.5
5-170
500
 
R/RF77
ф40/80
140
250
0.55-11.0
5-192
750
 
R/RF87
ф50/100
180
300
0.75-18.5
5-192
1250
 
R/RF97
ф60/120
225
350
1.50-30.0
5-197
2400
 
R/RF107
ф70/140
250
350
2.20-45.0
5-197
3600
 
R/RF137
ф90/170
315
450
4.00-45.00
5-197
6600
 
R/RF147
ф110/210
355
450
7.50-90.00
5-195
10700
 
R/RF167
ф120/210
425
550
11.00-132.00
5-186
14800
 

/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Foot/Flange Mounted
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:
Available

|


###

Input Configurations
Motor mounted
IEC B5/B14 Motor Flange (AM Flange)
Servo Motor Flange (AQA Flange)
Shaft Input (AD connection)
Output Configurations
Solid output shaft
Solid output shaft with flange
Variants of Helical Gear Unit Series RX / R / RF
Single Stage or 2/3 Stage
Foot- or flange-mounted
Foot- and flange-mounted
Flange-mounted with extended bearing housing

###

Housing material Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft material 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK.
Brand of oil seal NAK — Taiwan or other brands requested

###

Model
Solid Output Shaft Dia./Length
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
 
R/RF37
ф25/50
90
120
0.12-0.75
5-136
150
R/RF47
ф30/60
115
160
0.25-2.2
5-173
300
 
R/RF57
ф35/70
115
200
1.18-5.5
5-173
400
 
R/RF67
ф35/70
130
200
0.37-7.5
5-170
500
 
R/RF77
ф40/80
140
250
0.55-11.0
5-192
750
 
R/RF87
ф50/100
180
300
0.75-18.5
5-192
1250
 
R/RF97
ф60/120
225
350
1.50-30.0
5-197
2400
 
R/RF107
ф70/140
250
350
2.20-45.0
5-197
3600
 
R/RF137
ф90/170
315
450
4.00-45.00
5-197
6600
 
R/RF147
ф110/210
355
450
7.50-90.00
5-195
10700
 
R/RF167
ф120/210
425
550
11.00-132.00
5-186
14800
 

Why Choose a Helical Gearbox?

Choosing a helical gearbox is an important decision for any machine builder. It can help you to reduce maintenance costs, improve productivity and efficiency, and ensure that your equipment operates quietly and efficiently. In addition, it can also be compact in size and easy to install.helical gearbox

High productivity and efficiency

Compared to spur gears, helical gears have high productivity and efficiency. This is due to the fact that the helical gearbox is more effective at transferring power between right-angle configurations. Helical gears are also quieter. They also have the ability to tolerate a greater load. These gears are usually used in high-load applications, such as automotive transmission applications.
The basic features of helical gears include a slanted tooth face, a larger contact ratio, and a smoother performance. Helical gears are also less expensive than spur gears. They have more power carrying capacity, longer life, and are easier to maintain.
There are many factors that affect the efficiency of helical gearboxes. Some of them include the number of stages, reduction ratio, ambient conditions, and lubrication. They are also affected by the number of teeth.
Power loss in helical gears is mainly due to friction and heat. There are various approaches to minimize these losses. One approach is to analyse power losses using a numerical method.
Other factors that affect the efficiency of helical systems include speed, noise, and the number of teeth. The amount of power lost in gear mating is dependent on the load.

Low power consumption

Compared to other types of gearboxes, helical gearboxes have low power consumption. This is because they can tolerate more load, conduct smooth performance, and are quieter. They also require less oil changes and have a longer life span.
Helical gears have special teeth that are cut at an angle. The teeth are designed to engage gradually, rather than quickly. They can transfer power between parallel configurations and right-angle configurations.
Helical gearboxes are the most widely used gearboxes. They are also the most efficient. They can work at 98% efficiency. However, they are more expensive than spur gears. They can be packaged with oil-filled housings. They have less noise and require less maintenance. They can operate cooler, and have more torque capacity.
Helical gearboxes have two types: single and double helical gears. In the single type, the gears are perpendicular to the axis. They are usually used in automotive transmission applications. They can also be used in forward velocities. In the double type, the helical faces are next to each other.
Helical gears work at higher ratios, which increases their efficiency. They are also less noisy than spur gears. They are a good choice for applications that require high torque capacity. The basic efficiency of helical gearboxes ranges from 90% to 99.5%. They are also easier to operate and have a longer life span. They are suited to a wide range of applications.helical gearbox

Compact in size

Having a shiny new set of wheels is a nice change of pace. You get to sit in style and you get to drive it like the pro. The trick is finding the right one at the right time. Fortunately, there are plenty of companies who know how to build a high quality car that can be afforded by the average Joe. You’ll find all types of cars from sports coupes to hatchbacks. You’ll also find all types of drivers from the young professional to the seasoned veteran. You’ll also find all types of roads from main streets to back roads. There are even all types of parking spaces to choose from. With a bit of planning and some research, you’ll find the perfect fit for you and your family. You can’t help but wonder why you didn’t choose a vehicle with this many perks sooner. It’s a nice way to spend a night on the town, without having to worry about a parking fee. The next time you’re in the mood to take the family out to the country for a weekend in the great bluffs, you’ll know which ones to avoid.

Noise-free operation

Compared to spur gears, helical gears have better speed capability and quieter operation. However, helical gearboxes often have problems that stop their service. These faults result in increased productivity costs. These problems include fatigue, chipping tip, crack and missing tooth.
In this paper, we propose a novel signal processing scheme to detect gearbox faults at constant speed. The method involves the use of spectral subtraction (SS) to remove the spectral noise of a signal. This approach is widely used in speech signal processing. It is also used to estimate real-time noise information. The method was successfully applied to the analysis of gearbox faults.
The spectral subtraction technique is applied to the transmission error and to the side-band frequency feature. The side-band frequency is equal to the rotation frequency of the input shaft. A square envelope spectrum method is used to obtain the spectral feature. It was then used to obtain the corresponding fault signal. The method is then compared with experimentally measured noise data.
It is also important to note that the side-band feature is not stable in different noise levels. The optimal demodulation subband selection method is not obvious. However, the proposed method can obtain a stable amplitude value when SNR is low.
Another important factor that reduces noise is the overlap ratio. The overlap ratio is the sum of the transverse contact ratio and the face contact ratio. When the overlap ratio approaches one, the noise is minimized.

Improved performance at high speeds

Whether used in an industrial, automotive or power generation application, helical gearboxes provide a number of benefits over traditional spur gearing systems. These advantages include reduced noise, higher load capacity and smoother operation.
In an effort to reduce noise and improve performance at high speeds, Parker engineers developed a helical gearbox that runs quieter and produces 30-40% more torque than a conventionally modified gear. They also redesigned the entry and exit points of the gear tooth for increased efficiency and strength.
The high-speed helical geartrain has been tested at 5,000 hp power. The tests were performed in the High-Speed Helical Geartrain Test Facility at the NASA Glenn Research Center. The tests were conducted at four different design configurations and at multiple input shaft speeds. These tests included temperature increases from inlet to outlet, fling off temperatures, and power loss of the helical system.
The first step was to improve load distribution of the gear pair. This is done by modifying the microgeometry of each gear. In addition to modifying the microgeometry of each tooth, the length of the contact line was extended. This resulted in a higher tooth contact ratio.
Another option is to modify the straddle-mounted pin of the PGS. This is a complicated task because of spatial constraints. In order to determine whether the pin will have the desired effect, it needs to be tested in real-world tests.helical gearbox

Reduce maintenance costs

Compared to spur gears, helical gears have several advantages, such as less noise and vibration, greater load carrying capacity, and longer life. They also have a reduced maintenance cost.
Helical gears can be divided into two main types: single helical and crossed axis helicals. In the single helical type, two or three teeth connect at all times.
In crossed axis helicals, the shafts are inclined at a variety of angles. These gears are primarily used in non-perpendicular transmissions. They can have very low load carrying capacity, but they offer better strength and speed reduction than spur gears.
The double helical type has two mirrored rows of teeth that are angled. This type of gear is also known as a herringbone gear. It’s a design that’s ideal for non-perpendicular transmissions.
Helical gears are packaged in oil filled housings. They are a space saving gear reducer. They are used in automobile transmissions and other forward speeds. They are also used in industrial gearboxes.
Helical gears can be made of either solid or semi-solid materials. They can be sliced into an arbitrary number of cross sections. This allows the helix to be adjusted to suit the application.
It’s important to choose the right gear for your application. The gear’s design may include the number of teeth, lubricant type, surface treatment, and the tooth angle. It’s also important to choose the right lubricant, because it can affect the noise levels and the efficiency of the gear.
China Rxf Series Single-Stage Helical Gearbox with Flange     with Good quality China Rxf Series Single-Stage Helical Gearbox with Flange     with Good quality
editor by CX 2023-04-04

Double Helical Gear

As one of the leading double helical gear manufacturers, suppliers, and exporters of mechanical products, We offer double helical gear and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of double helical gear.

Recent Posts